Effects of resin formulation and nanofiller surface treatment on the properties of experimental hybrid resin composite
Loading...
Date
2004
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Biomaterials
Abstract
This study evaluated the effects of nanofiller surface treatment and resin viscosity on the early and long-term properties of experimental hybrid composites. Three resin formulations (low, medium and high viscosity) were prepared by varying the ratio of TEGDMA:UDMA:bis-GMA (47:33:16wt%; 30:33:33wt%; 12:33:51wt%). Composites contained 71.3wt% silanated strontium glass (1–3μm) and 12.6wt% of either silanated or unsilanated silica (OX-50; 0.04μm). Specimens (n=10) for flexural strength, flexural modulus, fracture toughness and Knoop hardness were tested after 24h, 1 and 6 months exposure to water at 37°C. Degree of conversion (DC) was determined 24h after photoinitiation using FTIR. Resin viscosity only had a marginal influence on the mechanical response of composites but it can be adjusted to achieve a balance between DC and mechanical properties. Adding non-bonded nanofiller to hybrid composites had no systematic effect on DC. Non-bonded nanofillers had no significant effect on the long-term properties of hybrid composites.
Description
Keywords
Composite, Properties, Silane, Nanofiller, Viscosity
Citation
Musanje, L., & Ferracane, J. L. (2004). Effects of resin formulation and nanofiller surface treatment on the properties of experimental hybrid resin composite. Biomaterials, 25(18), 4065-4071.https://doi.org/10.1016/j.biomaterials.2003.11.003