Optimization of roughing filtration unit for a handwashing wastewater recirculation point-of-use system

Simple item page
dc.contributor.authorOlupot, Peter Wilberforce
dc.contributor.authorMenya, Emmanuel
dc.contributor.authorJjagwe, Joseph
dc.contributor.authorWakatuntu, Joel
dc.contributor.authorRománc, Franz
dc.contributor.authorHensel, Oliver
dc.date.accessioned2023-01-23T16:25:22Z
dc.date.available2023-01-23T16:25:22Z
dc.date.issued2022
dc.description.abstractA downward roughing filter unit consisting of silica sand as the filter medium was optimized for performance towards removal of turbidity and suspended solids from handwashing wastewater. Design-Expert software was employed to optimize media particle size, filter depth, and flowrate. Linear and quadratic models were found to best fit the responses of turbidity and suspended solids removal, respectively. Particle size and flow rate were the only parameters with significant effects on removal of turbidity and suspended solids. Optimal conditions were found to be media particle size 0.6 mm, filter depth 12 cm, and flow rate 0.3 Lmin 1, corresponding to removal efficiencies of 62 and 67% for turbidity and total suspended solids (TSS), respectively, as predicted by the model. Validation of model at optimal conditions resulted in turbidity and TSS removal of 55 and 53%, respectively. Additionally, removal efficiencies of the roughing filter towards apparent colour, true colour, biochemical oxygen demand (BOD5), and chemical oxygen demand (COD) from handwashing wastewater were 56, 20, 32, and 5%, respectively. Overall, although turbidity of filtered water was .50 NTU, the reduction achieved by roughing filtration is a significant step in enhancing the performance of water treatment processes downstream, including filtration and adsorption by slow sand filters and activated carbon, respectively.en_US
dc.identifier.citationOlupot, P. W., Menya, E., Jjagwe, J., Wakatuntu, J., Román, F., & Hensel, O. (2022). Optimization of roughing filtration unit for a handwashing wastewater recirculation point-of-use system. Water Science & Technology, 86(10), 2528-2544. doi: 10.2166/wst.2022.358en_US
dc.identifier.other10.2166/wst.2022.358
dc.identifier.urihttps://nru.uncst.go.ug/handle/123456789/7145
dc.language.isoenen_US
dc.publisherWater Science & Technologyen_US
dc.subjectFiltrationen_US
dc.subjectHandwashingen_US
dc.subjectRecyclingen_US
dc.subjectRoughing filteren_US
dc.subjectWastewateren_US
dc.titleOptimization of roughing filtration unit for a handwashing wastewater recirculation point-of-use systemen_US
dc.typeArticleen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Optimization of roughing filtration unit for a handwashing wastewater recirculation.pdf
Size:
947.33 KB
Format:
Adobe Portable Document Format
Description:
Article
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Engineering and Technology