Influence of the Anode Buffer Layer Materials and the Light Radiation Power on the Efficiency of a Planar p-i-n Perovskite Solar Cell: theory and simulation

Simple item page
dc.contributor.authorFarhadi, Bita
dc.contributor.authorZabihi, Fatemeh
dc.contributor.authorTebyetekerwa, Mike
dc.contributor.authorLugoloobi, Ishaq
dc.contributor.authorLiu, Aimin
dc.date.accessioned2023-03-13T18:38:32Z
dc.date.available2023-03-13T18:38:32Z
dc.date.issued2022
dc.description.abstractPlanar perovskite solar cell (PSC) measuring 900 nm total thickness is designed and simulated using Silvaco and SCAPS. Silvaco (Atlas 5.16.3.R) photovoltaic simulating system enables the formation of the stacking model and estimation of the physical properties of various functional materials, whereas SCAPS (version. 3.3.07) patterns the photovoltaic metrics including the fill factor (FF), power conversion efficiency (PCE), open-circuit voltage (Voc), short-circuit current density (Jsc), maximum voltage (Vm), maximum current (Im), absorption and reflection coefficients, and energy state diagram of the whole device. Alternation of illumination power and use of different buffer materials was utilized as the main tuning strategy. The champion layout was achieved by optimization of the stacking model, material system, and power of illumination, which demonstrated 26.32% PCE, 83.77% FF, Jsc of 26.27  mA  /  cm2, and the exceptional Voc of 1.19 V. This theoretical performance remains stable in 1000  W  /  m2 light radiation. The calculated efficiency and FF were very close to the previously reported experimental data, and this proved the high accuracy of this simulation work. These findings promise a feasible application of PSC in high-efficiency wearable electronics.en_US
dc.identifier.citationFarhadi, B., Zabihi, F., Tebyetekerwa, M., Lugoloobi, I., & Liu, A. (2022). Influence of the anode buffer layer materials and the light radiation power on the efficiency of a planar pin perovskite solar cell: theory and simulation. Journal of Photonics for Energy, 12(1), 015503-015503.https://doi.org/10.1117/1.JPE.12.015503en_US
dc.identifier.urihttps://nru.uncst.go.ug/handle/123456789/8164
dc.language.isoenen_US
dc.publisherJournal of Photonics for Energyen_US
dc.subjectsolar cellen_US
dc.subjectbuffer layeren_US
dc.subjectradiationen_US
dc.subjectabsorptionen_US
dc.subjectreflectionen_US
dc.subjectperovskitesen_US
dc.titleInfluence of the Anode Buffer Layer Materials and the Light Radiation Power on the Efficiency of a Planar p-i-n Perovskite Solar Cell: theory and simulationen_US
dc.typeArticleen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Influence of the anode buffer layer materials and the light radiation power on the efficiency of a planar p-i-n perovskite solar cell theory and simulation.pdf
Size:
4.4 MB
Format:
Adobe Portable Document Format
Description:
Influence of the anode buffer layer materials and the light radiation power on the efficiency of a planar p-i-n perovskite solar cell: theory and simulation
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Engineering and Technology