NRU :: Browsing by Author "Schuhmann, Wolfgang"

Browsing by Author "Schuhmann, Wolfgang"

Now showing 1 - 20 of 29

Activation and Stabilization of Nitrogen-Doped Carbon Nanotubes as Electrocatalysts in the Oxygen Reduction Reaction at Strongly Alkaline Conditions
(The Journal of Physical Chemistry C, 2013) Zhao, Anqi; Masa, Justus; Schuhmann, Wolfgang; Xia, Wei
Nitrogen-doped carbon nanotubes (NCNTs) are highly active electrocatalysts in the oxygen reduction reaction (ORR) at alkaline conditions. However, the initial activation and stabilization of NCNTs have rarely been investigated at industrially relevant conditions. Three types of NCNTs were synthesized by catalytic growth (NCNT-growth) or posttreatment of oxygen-functionalized CNTs with NH3 (NCNT-NH3) or aniline (NCNT-aniline). The obtained NCNTs were treated in 10 M KOH at 80 °C for 5 h, and the formation of oxygen groups by alkaline treatment and their interaction with existing nitrogen groups was analyzed. X-ray photoelectron spectroscopy showed that the concentrations of pyridinic and quaternary nitrogen increased in NCNT-growth due to the KOH treatment accompanied by the decrease of pyrrolic nitrogen, whereas the nitrogen groups changed differently in NCNT-NH3 and NCNT-aniline. NCNT-NH3 showed the highest ORR activity before alkaline treatment. After the treatment, the activity of NCNT-growth was higher, whereas those of NCNT-NH3 and NCNT-aniline were lower. These results were found to be correlated with changes in the nitrogen groups caused by alkaline treatment. Furthermore, NCNTs showed different C═O/C–O ratios after alkaline treatment as compared to a strong increase of C–O in CNTs, indicating that the presence of nitrogen in NCNTs influences the formation of oxygen groups on carbon and surface oxidation.
Activation of Oxygen evolving Perovskites for Oxygen Reduction by Functionalization with Fe-Nx/C groups
(Chemical communications, 2014) Rincón, Rosalba A.; Masa, Justus; Mehrpour, Sara; Tietz, Frank; Schuhmann, Wolfgang
The incorporation of Fe–Nx/C moieties into perovskites remarkably activates them for the oxygen reduction reaction (ORR) and also leads to notable improvement of their activity towards the oxygen evolution reaction (OER) thus presenting a new route for realizing high performance, low cost bifunctional catalysts for reversible oxygen electrodes.
Amorphous Cobalt Boride (Co 2 B) as a Highly Efficient Nonprecious Catalyst for Electrochemical Water Splitting: Oxygen and Hydrogen Evolution
(Advanced Energy Materials, 2016) Masa, Justus; Weide, Philipp; Peeters, Daniel; Schuhmann, Wolfgang
It is demonstrated that amorphous cobalt boride (Co2B) prepared by the chemical reduction of CoCl2 using NaBH4 is an exceptionally efficient electrocatalyst for the oxygen evolution reaction (OER) in alkaline electrolytes and is simultaneously active for catalyzing the hydrogen evolution reaction (HER). The catalyst achieves a current density of 10 mA cm−2 at 1.61 V on an inert support and at 1.59 V when impregnated with nitrogen-doped graphene. Stable performance is maintained at 10 mA cm−2 for at least 60 h. The optimized catalyst, Co2B annealed at 500 °C (Co2B-500) evolves oxygen more efficiently than RuO2 and IrO2, and its performance matches the best cobalt-based catalysts reported to date. Co2B is irreversibly oxidized at OER conditions to form a CoOOH surface layer. The active form of the catalyst is therefore represented as CoOOH/Co2B. EXAFS observations indicate that boron induces lattice strain in the crystal structure of the metal, which potentially diminishes the thermodynamic and kinetic barrier of the hydroxylation reaction, formation of the OOH* intermediate, a key limiting step in the OER.
B-Cu-Zn Gas Diffusion Electrodes for CO2 Electroreduction to C2+ Products at High Current Densities
(Angewandte Chemie International Edition, 2021) Song, Yanfang; Junqueira, Jo¼o R. C.; Sikdar, Nivedita; Masa, Justus; Andronescu, Corina; Schuhmann, Wolfgang
Electroreduction of CO2 to multi-carbon products has attracted considerable attention as it provides an avenue to high-density renewable energy storage. However, the selectivity and stability under high current densities are rarely reported. Herein, B-doped Cu (B-Cu) and B-Cu-Zn gas diffusion electrodes (GDE) were developed for highly selective and stable CO2 conversion to C2+ products at industrially relevant current densities. The B-Cu GDE exhibited a high Faradaic efficiency of 79 % for C2+ products formation at a current density of −200 mA cm−2 and a potential of −0.45 V vs. RHE. The long-term stability for C2+ formation was substantially improved by incorporating an optimal amount of Zn. Operando Raman spectra confirm the retained Cu+ species under CO2 reduction conditions and the lower overpotential for *OCO formation upon incorporation of Zn, which lead to the excellent conversion of CO2 to C2+ products on B-Cu-Zn GDEs.
Cascade Reactions in Nanozymes: Spatially Separated Active Sites inside Ag-Core−Porous-Cu-Shell Nanoparticles for Multistep Carbon Dioxide Reduction to Higher Organic Molecules
(Journal of the American Chemical Society, 2019) O’Mara, Peter B.; Wilde, Patrick; Benedetti, Tania M.; Andrones, Corina; Cheong, Soshan; Gooding, Justin; Tilley, Richard D.; Schuhmann, Wolfgang
Enzymes can perform complex multistep cascade reactions by linking multiple distinct catalytic sites via substrate channeling. We mimic this feature in a generalized approach with an electrocatalytic nanoparticle for the carbon dioxide reduction reaction comprising a Ag core surrounded by a porous Cu shell, providing different active sites in nanoconfined volumes. The architecture of the nanozyme provides the basis for a cascade reaction, which promotes C−C coupling reactions. The first step occurs on the Ag core, and the subsequent steps on the porous copper shell, where a sufficiently high CO concentration due to the nanoconfinement facilitates C−C bond formation. The architecture yields the formation of n-propanol and propionaldehyde at potentials as low as −0.6 V vs RHE.
Co3O4@Co/NCNT Nanostructure Derived from a Dicyanamide Based Metal-Organic Framework as Efficient Bi-functional Electrocatalyst for Oxygen Reduction and Evolution Reactions
(Chemistry–A European Journal, 2017) Sikdar, Nivedita; Konkena, Bharathi; Masa, Justus; Schuhmann, Wolfgang
There has been growing interest in the synthesis of efficient reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and the oxygen evolution reactions (OER), for their potential use in a variety of renewable energy technologies, such as regenerative fuel cells and metal-air batteries. Here, a bi-functional electrocatalyst, derived from a novel dicyanamide based nitrogen rich MOF {[Co(bpe)2(N(CN)2)]⋅(N(CN)2)⋅(5 H2O)}n [Co-MOF-1, bpe=1,2-bis(4-pyridyl)ethane, N(CN)2−=dicyanamide] under different pyrolysis conditions is reported. Pyrolysis of the Co-MOF-1 under Ar atmosphere (at 800 °C) yielded a Co nanoparticle-embedded N-doped carbon nanotube matrix (Co/NCNT-Ar) while pyrolysis under a reductive H2/Ar atmosphere (at 800 °C) and further mild calcination yielded Co3O4@Co core–shell nanoparticle-encapsulated N-doped carbon nanotubes (Co3O4@Co/NCNT). Both catalysts show bi-functional activity towards ORR and OER, however, the core–shell Co3O4@Co/NCNT nanostructure exhibited superior electrocatalytic activity for both the ORR with a potential of 0.88 V at a current density of −1 mA cm−2 and the OER with a potential of 1.61 V at 10 mA cm−2, which is competitive with the most active bi-functional catalysts reported previously.
Combining Nanoconfinement in Ag Core/Porous Cu Shell Nanoparticles with Gas Diffusion Electrodes for Improved Electrocatalytic Carbon Dioxide Reduction
(ChemElectroChem, 2021) Junqueira, João R. C.; O’Mara, Peter B.; Wilde, Patrick; Dieckhöfer, Stefan; Benedetti, Tania M.; Andronescu, Corina; Tilley, Richard D.; Gooding, J. Justin; Schuhmann, Wolfgang
Bimetallic silver-copper electrocatalysts are promising materials for electrochemical CO2 reduction reaction (CO2RR) to fuels and multi-carbon molecules. Here, we combine Ag core/porous Cu shell particles, which entrap reaction intermediates and thus facilitate the formation of C2+ products at low overpotentials, with gas diffusion electrodes (GDE). Mass transport plays a crucial role in the product selectivity in CO2RR. Conventional Hcell configurations suffer from limited CO2 diffusion to the reaction zone, thus decreasing the rate of the CO2RR. In contrast, in the case of GDE-based cells, the CO2RR takes place under enhanced mass transport conditions. Hence, investigation of the Ag core/porous Cu shell particles at the same potentials under different mass transport regimes reveals: (i) a variation of product distribution including C3 products, and (ii) a significant change in the local OH- activity under operation.
Electrocatalysis as the Nexus for Sustainable Renewable Energy: The Gordian Knot of Activity, Stability, and Selectivity
(Angewandte Chemie International Edition, 2020) Masa, Justus; Andronescu, Corina; Schuhmann, Wolfgang
The use of renewable energy by means of electrochemical techniques by converting H2O, CO2 and N2 into chemical energy sources and raw materials, is the basis for securing a future sustainable “green” energy supply. Some weaknesses and inconsistencies in the practice of determining the electrocatalytic performance, which prevents a rational bottom-up catalyst design, are discussed. Large discrepancies in material properties as well as in electrocatalytic activity and stability become obvious when materials are tested under the conditions of their intended use as opposed to the usual laboratory conditions. They advocate for uniform activity/stability correlations under application-relevant conditions, and the need for a clear representation of electrocatalytic performance by contextualization in terms of functional investigation or progress towards application is emphasized.
Electrocatalytic 5-(hydroxymethyl)furfural Oxidation using High Surface Area Nickel Boride
(Angewandte Chemie International Edition, 2018) Barwe, Stefan; Weidner, Jonas; Moralesa, Dulce M.; Schuhmann, Wolfgang
The electrochemical oxidation of the biorefinery product 5-(hydroxymethyl)furfural (HMF) to 2,5-furandicarboxylic acid (FDCA), an important platform chemical for the polymer industry, is receiving increasing interest. FDCA-based polymers such as polyethylene 2,5-furandicarboxylate (PEF) are sustainable candidates for replacing polyethylene terephthalate (PET). Herein, we report the highly efficient electrocatalytic oxidation of HMF to FDCA, using Ni foam modified with high-surface-area nickel boride (NixB) as the electrode. Constant potential electrolysis in combination with HPLC revealed a high faradaic efficiency of close to 100 % towards the production of FDCA with a yield of 98.5 %. Operando electrochemistry coupled to ATR-IR spectroscopy indicated that HMF is oxidized preferentially via 5-hydroxymethyl-2-furancarboxylic acid rather than via 2,5-diformylfuran, which is in agreement with HPLC results. This study not only reports a low-cost active electrocatalyst material for the electrochemical oxidation of HMF to FDCA, but additionally provides insight into the reaction pathway.
Electrocatalytic Oxidation of Glycerol Using Solid-State Synthesised Nickel Boride: Impact of Key Electrolysis Parameters on Product Selectivity
(ChemElectroChem, 2021) Brix, Ann Cathrin; Morales, Dulce M.; Braun, Michael; Masa, Justus; Schuhmann, Wolfgang
Water electrolysis is a promising technology for sustainable hydrogen production; however, its commercialisation is limited by sluggish kinetics of the oxygen evolution reaction (OER). A potential alternative to the OER is hence required and is seen in the electrocatalytic glycerol oxidation reaction (GOR) as it offers concomitant value-added product generation from a cheap and abundant feedstock. Here, we show a facile solid-state synthesis method to obtain Ni-boride, a non-noble metal-based catalyst subsequently used in an in-depth study of the GOR product distribution as a function of key electrolysis parameters. Highly crystalline, mixed-phase Ni borides were obtained, and their synthesis was successfully optimised regarding GOR activity. Long-term chronoamperometry was conducted in a circular flow-through cell and samples were analysed by HPLC. It is shown that the formation of lactic acid, one of the most valuable GOR products, can be enhanced by optimising the electrolyte composition and the applied potential.
Highly Active Metal-free Nitrogen-Containing Carbon Catalysts for Oxygen Reduction Synthesized by ThermalTreatment of Polypyridine-Carbon Black Mixtures
(Electrochemistry communications, 2011) Xia, Wei; Masa, Justus; Bron, Michael; Schuhmann, Wolfgang; Muhler, Martin
A straight-forward method for the synthesis of metal-free catalysts for oxygen reduction by thermal treatment of a mixture of poly(3,5-pyridine) with carbon black in helium is reported. The catalyst was characterized by X-ray diffraction and photoelectron spectroscopy, cyclic voltammetry and rotating disk electrode measurements. The new catalyst exhibited remarkable activity similar to Pt-based catalysts in alkaline media.
Highly Concentrated Aqueous Dispersions of Graphene Exfoliated by Sodium Taurodeoxycholate: Dispersion Behavior and Potential Application as a Catalyst Support for the Oxygen-Reduction Reaction
(Chemistry–A European Journal, 2012) Sun, Zhenyu; Masa, Justus; Liu, Zhimin; Schuhmann, Wolfgang; Muhler, Martin
A high-yielding exfoliation of graphene at high concentrations in aqueous solutions is critical for both fundamental study and future applications. Herein, we demonstrate the formation of stable aqueous dispersions of pristine graphene by using the surfactant sodium taurodeoxycholate under tip sonication at concentrations of up to 7.1 mg mL−1. TEM showed that about 8 % of the graphene flakes consisted of monolayers and 82 % of the flakes consisted of less than five layers. The dispersions were stable regardless of freezing (−20 °C) or heat treatment (80 °C) for 24 h. The concentration could be significantly improved to about 12 mg mL−1 by vacuum-evaporation of the dispersions at ambient temperature. The as-prepared graphene dispersions were readily cast into conductive films and were also processed to prepare Pt/graphene nanocomposites that were used as highly active electrocatalysts for the oxygen-reduction reaction.
Influence of Temperature and Electrolyte Concentration on the Structure and Catalytic Oxygen Evolution Activity of NiFe LDH
(Chemistry–A European Journal, 2018) Andronescu, Corina; Seisel, Sabine; Wilde, Patrick; Barwe, Stefan; Masa, Justus; Schuhmann, Wolfgang
NiFe layered double hydroxide (LDH) is inarguably the most active contemporary catalyst for the oxygen evolution reaction under alkaline conditions. However, the ability to sustain unattenuated performance under challenging industrial conditions entailing high corrosivity of the electrolyte (≈30 wt. % KOH), high temperature (>80 °C) and high current densities (>500 mA cm−2) is the ultimate criterion for practical viability. This work evaluates the chemical and structural stability of NiFe LDH at conditions akin to practical electrolysis, in 30 % KOH at 80 °C, however, without electrochemical polarization, and the resulting impact on the OER performance of the catalyst. Post-analysis of the catalyst by means of XRD, TEM, FT-IR, and Raman spectroscopy after its immersion into 7.5 m KOH at 80 °C for 60 h revealed a transformation of the structure from NiFe LDH to a mixture of crystalline β-Ni(OH)2 and discrete predominantly amorphous FeOOH containing minor non-homogeneously distributed crystalline domains. These structural and compositional changes led to a drastic loss of the OER activity. It is therefore recommended to study catalyst stability at industrially relevant conditions.
Is Cu instability during the CO2 reduction reaction governed by the applied potential or the local CO concentration?
(Chemical science, 2021) Wilde, Patrick; O'Mara, Peter B.; Junqueira, Joao R. C.; Tarnev, Tsvetan; Benedetti, Tania M.; Andronescu, Corina; Chen, Yen-Ting; Tilley, Richard D.; Schuhmann, Wolfgang; Gooding, J. Justin
have shown structural instability during the electrochemical CO2 reduction reaction (CO2RR). However, studies on monometallic Cu catalysts do not allow a nuanced differentiation between the contribution of the applied potential and the local concentration of CO as the reaction intermediate since both are inevitably linked. We first use bimetallic Ag-core/porous Cu-shell nanoparticles, which utilise nanoconfinement to generate high local CO concentrations at the Ag core at potentials at w
Koutecky-Levich Analysis Applied to Nanoparticle Modified Rotating Disk Electrodes: Electrocatalysis orMisinterpretation?
(Nano Research, 2014) Masa, Justus; Batchelor-McAuley, Christopher; Schuhmann, Wolfgang; Compton, Richard G.
The application of naive Koutecky-Levich analysis to micro- and nano-particle modified rotating disk electrodes of partially covered and non-planar geometry is critically analysed. Assuming strong overlap of the diffusion fields of the particles such that transport to the entire surface is time-independent and one-dimensional, the observed voltammetric response reflects an apparent electrochemical rate constant k oapp, equal to the true rate constant k o describing the redox reaction of interest on the surface of the nanoparticles and the ratio, ψ, of the total electroactive surface area to the geometric area of the rotating disk surface. It is demonstrated that Koutecky-Levich analysis is applicable and yields the expected plots of I −1 versus ω −1 where I is the current and ω is the rotation speed but that the values of the electrochemical rate constants inferred are thereof k o app , not k o. Thus, for ψ > 1 apparent electrocatalysis might be naively but wrongly inferred whereas for ψ < 1 the deduced electrochemical rate constant will be less than k o. Moreover, the effect of ψ on the observed rotating disk electrode voltammograms is significant, signalling the need for care in the overly simplistic application of Koutecky-Levich analysis to modified rotating electrodes, as is commonly applied for example in the analysis of possible oxygen reduction catalysts.
Metal-free Catalysts for Oxygen Reduction in Alkaline Electrolytes: Influence of the Presence of Co, Fe, Mn and Ni Inclusions
(Electrochimica Acta, 2014) Masa, Justus; Zhao, Anqi; Xia, Wei; Muhler, Martin; Schuhmann, Wolfgang
Metal-free nitrogen modified carbon catalysts (NC) are very closely related to MNC catalysts which contain a transition metal(s) (M), usually Fe or Co as an essential constituent. We investigated the influence of metal inclusions on the activity of nitrogen-doped carbon black in the electrocatalysis of the oxygen reduction reaction (ORR). A reference metal-free NC catalyst was prepared by pyrolysis of a polypyrrole/Vulcan XC72 composite at 800 °C for 2 h under helium. Controlled amounts of Co, Fe, Mn and Ni in low concentrations were then introduced into NC by impregnating it with the corresponding meso-tetra(4-pyridyl) porphyrin metal complex followed by further pyrolysis at 650 °C for 2 h under helium. The resulting catalysts were investigated for ORR using rotating disk electrode and rotating-ring disk electrode voltammetry in 0.1 M KOH. Additionally, the rate of decomposition of hydrogen peroxide by the different catalysts was determined in order to probe the influence of the metal inclusions on the mechanism and selectivity of the ORR. The results show that Fe, Co and Mn inclusions cause a substantial decrease of the overpotential of the reaction and enhance the catalytic current, whereas the presence of Ni has a poisoning effect on ORR. In the presence of Fe, the catalysts apparently reduce oxygen selectively to OH− in a direct four electron transfer process as opposed to the two-step, two electron pathway involving hydrogen peroxide as an intermediate for the case of the NC catalyst.
MnxOy/NC and CoxOy/NC Nanoparticles Embedded in a Nitrogen Doped Carbon Matrix for High-Performance Bifunctional Oxygen Electrodes
(Angewandte Chemie International Edition, 2014) Masa, Justus; Xia, Wei; Schuhmann, Wolfgang
Reversible interconversion of water into H2 and O2, and the recombination of H2 and O2 to H2O thereby harnessing the energy of the reaction provides a completely green cycle for sustainable energy conversion and storage. The realization of this goal is however hampered by the lack of efficient catalysts for water splitting and oxygen reduction. We report exceptionally active bifunctional catalysts for oxygen electrodes comprising Mn3O4 and Co3O4 nanoparticles embedded in nitrogen-doped carbon, obtained by selective pyrolysis and subsequent mild calcination of manganese and cobalt N4 macrocyclic complexes. Intimate interaction was observed between the metals and nitrogen suggesting residual M–Nx coordination in the catalysts. The catalysts afford remarkably lower reversible overpotentials in KOH (0.1 M) than those for RuO2, IrO2, Pt, NiO, Mn3O4, and Co3O4, thus placing them among the best non-precious-metal catalysts for reversible oxygen electrodes reported to date.
MoSSe@reduced Graphene Oxide Nanocomposite Heterostructures as Efficient and Stable Electrocatalysts for the Hydrogen Evolution Reaction
(Nano Energy, 2016) Konkena, Bharathi; Masa, Justus; Xia, Wei; Muhler, Martin; Schuhmann, Wolfgang
Non-noble metal based materials efficiently catalyzing the hydrogen evolution reaction (HER) are reported based on a novel strategy where electrocatalytically active ultrathin molybdenum sulphoselenide sheets are incorporated into electrically conducting reduced graphene oxide sheets via a self-assembly approach. By taking advantage of the electrostatic attraction between the two oppositely charged nanosheets, MoSSe@rGO composite materials are obtained exhibiting superior electrocatalytic activity and stability for the HER allowing a current density of 5mAcm−2 at a low overpotential of only 135mV. These findings pave the way to novel electrocatalysts based on composites of MoSSe and reduced graphene oxide towards the design of ultra-light, mechanically robust and electrically conductive electrode materials for electrocatalytic water splitting.
N-doped Carbon Synthesized from N-containing Polymers as Metal-free Catalysts for the Oxygen Reduction under Alkaline Conditions
(Electrochimica Acta, 2013) Zhao, Anqi; Masa, Justus; Muhler, Martin; Schuhmann, Wolfgang; Xia, Wei
Nitrogen-doped carbon materials were synthesized and used as metal-free electrocatalysts for the oxygen reduction reaction (ORR) under alkaline conditions. The synthesis was achieved by thermal treatment of nitrogen-containing polymers diluted in different carbon materials. Polypyrrole, polyaniline and polyacrylonitrile were used as N precursors. Carbon black and two types of commercial carbon nanotubes were used as carbon matrices. The obtained N contents were in the range of 1–1.8 wt.%. Different N species including pyridinic, pyrrolic and quaternary N were quantitatively determined by X-ray photoelectron spectroscopy. The ORR activities were evaluated in 0.1 M KOH. Rotating disc electrode studies revealed the presence of multiple active centers in all the samples. The sample obtained using polypyrrole and small diameter nanotubes (ca. 15 nm) had the highest onset potential at −0.07 V vs. Ag/AgCl/3 M KCl, which also showed a significantly higher electrochemical stability than the sample from carbon black and polypyrrole. The ORR activity was not correlated to the total nitrogen amount, but to the amount of pyridinic and quaternary N species. For the onset potential and the (Npyridinic + Nquaternary)/Ntotal ratio a quasi-linear relation was found, which points to the substantial role of pyridinic- and quaternary-N species in ORR catalysis.
Nanoelectrodes Reveal the Electrochemistry of Single Nickelhydroxide Nanoparticles
(Chemical Communications, 2016) Clausmeyer, Jan; Masa, Justus; Ventosa, Edgar; Schuhmann, Wolfgang
Individual Ni(OH)2 nanoparticles deposited on carbon nanoelectrodes are investigated in non-ensemble measurements with respect to their energy storage properties and electrocatalysis for the oxygen evolution reaction (OER). Charging by oxidation of Ni(OH)2 is limited by the diffusion of protons into the particle bulk and the OER activity is independent of the particle size.

Browsing by Author "Schuhmann, Wolfgang"

Results Per Page

Sort Options