Browsing by Author "Bonten, Christian"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Development of fiberreinforced polypropylene with NaOH pretreated rice and coffee husks as fillers: Mechanical and thermal properties
    (Journal of Thermoplastic Composite Materials, 2020) Andrew Yiga, Vianney; Page, Sinja; Lubwama, Michael; Epple, Stefan; Olupot, Peter Wilberforce; Bonten, Christian
    Incorporation of agricultural wastes as fillers in fiber-reinforced plastics is gaining momentum in plastics engineering research. In this study, fiber-reinforced polypropylene (PP) with rice and coffee husks as filler material were developed. The effect of alkali (sodium hydroxide) pretreatment of the husks on mechanical and thermal properties of developed PP biocomposites was observed. Filler material loading was varied from 0% to 20% for rice husks and 0% to 10% for coffee husks. A twin-screw extruder was used for compounding the PP matrix with rice and coffee husk filler materials. Tensile strengths and percentage elongation results varied from 27.4 to 37.4 MPa and 2.4% to 70.3% (unmodified coffee husks), 31.1 to 37.4 MPa and 5% to 70.3% (unmodified rice husks), 30.7 to 37.4 MPa and 5.3% to 70.3% (modified coffee husks), and 30.7 to 37.4 MPa and 4.8% to 70.3% (modified rice husks). Young’s modulus ranged between 1656 and 2247.8 MPa for biocomposite PP samples with unmodified filler material. Young’s modulus ranged between 1740 and 2160 MPa after alkali treatment of the filler material. Charpy impact strengths ranged from 1.2 to 4 kJ/m2 and 3.1 to 19.6 kJ/m2 for samples containing unmodified and modified filler material, respectively. Thermogravimetric analysis showed that an increase in filler content resulted into delayed weight loss at high degradation temperatures. The results suggest that these developed fiber-reinforced plastics can be used in applications requiring high thermal stability and good mechanical properties.
  • Thumbnail Image
    Item
    Flame retardancy and thermal stability of agricultural residue fiber-reinforced polylactic acid: A Review
    (Polymer Composites, 2021) Yiga, Vianney Andrew; Lubwama, Michael; Pagel, Sinja; Benz, Johannes; Olupot, Peter Wilberforce; Bonten, Christian
    Biocomposites containing natural fibers and biopolymers are an ideal choice for developing substantially biodegradable materials for different applications. Polylactic acid is a biopolymer produced from renewable resources and has drawn numerous interest in packaging, electrical, and automotive application in recent years. However, its potential application in both electrical and automotive industries is limited by its flame retardancy and thermal properties. One way to offset this challenge has been to incorporate natural or synthetic flame retardants in polylactic acid (PLA). The aim of this article is to review the trends in research and development of composites based on agricultural fibers and PLA biopolymers over the past decade. This article highlights recent advances in the fields of flame retardancy and thermal stability of agricultural fiber-reinforced PLA. Typical fiber-reinforced PLA processing techniques are mentioned. Over 75% of the studies reported that incorporation of agricultural fibers resulted in enhanced flame retardancy and thermal stability of fiberreinforced PLA. These properties are further enhanced with surface modifications on the agricultural fibers prior to use as reinforcement in fiber-reinforced PLA. From this review it is clear that flame retardancy and thermal stability depends on the type and pretreatment method of the agricultural fibers used in developing fiber-reinforced PLA. Further research and development is encouraged on the enhancement of the flame retardancy properties of agricultural fiber-reinforced PLA, especially using agricultural fibers themselves as flame retardants as opposed to synthetic flame retardants that are typically used.
  • Thumbnail Image
    Item
    Optimization of tensile strength of PLA/clay/rice husk composites using Box‑Behnken design
    (Biomass Conversion and Biorefinery, 2021) Yiga, Vianney Andrew; Lubwama, Michael; Pagel, Sinja; Olupot, Peter Wilberforce; Benz, Johannes; Bonten, Christian
    Abstract It is extremely important to save costs and time while enhancing accuracy in experimentation. However, no study has utilized response surface methodology (RSM) to obtain the effects of independent parameters on properties of PLA/clay/rice husk composites. This study focused on optimization of tensile strength of fiber-reinforced polylactic acid (PLA) composites. RSM using Box-Behnken design (BBD) was used to determine optimum blending parameters of the developed composites. Fiber-reinforced PLA composites were prepared using compression molding. Rice husk fiber and clay filler were used to enhance tensile properties of PLA. Five factors, namely, clay filler loading (1 − 5 wt.%), rice husk fiber loading (10 − 30 wt.%), alkali concentration (0 − 4 wt.%), rice husk variety (K85, K98), and alkali type (NaOH, Mg(OH)2) were varied with 68 individual experiments. Tensile tests were carried out according to ASTM D638 standards. ANOVA results revealed that the quadratic models best fit the tensile strength response, with filler loading and fiber loading factors as the most significant model terms. Interaction effects were more predominant than linear and quadratic effects. The developed models used to determine maximum tensile strengths of PLA/clay/rice husk composites were in close agreement with experimental findings (R2 values of 0.9635, 0.9624, 0.9789, and 0.9731 for NaOH-modified K85 rice husks, Mg(OH)2-modified K85 rice husks, NaOH-modified K98 rice husks, and Mg(OH)2-modified K98 rice husks respectively). Individual optimal conditions were used to predict maximum tensile strengths in each set of developed composites. The predicted tensile strengths were 32.09 MPa, 33.69 MPa, 32.47 MPa, and 32.75 MPa for PLA/clay composites loaded with NaOH-modified K85 rice husks, Mg(OH)2-modified K85 rice husks, NaOH-modified K98 rice husks, and Mg(OH)2-modified K98 rice husks, respectively, which were very close to the obtained experimental values of 31.73 MPa, 33.06 MPa, 32.02 MPa, and 31.86 MPa respectively.